BSR Speed Rivet

Speed rivet with a repetition system suitable for applications in metal, plastic and aluminium alloys. Bralo BSR Rivet is synonymous of speed and efficiency.

Bralo BSR Speed Rivets are designed for the fastening, in a fast and precise way, of all kinds of materials, metal or plastic, composites and electronic components.

They are supplied in a strip of paper (loading system) and placed using a repetition system with a single mandrel. At the end of a riveting cycle, the next rivet is automatically fed in the tool nose-piece, ready to begin a new cycle. This is possible due to its bulging or pre-shaped end. The result is a fastener element with a high torque capacity and a good resistance to shear strength.


Features and benefits
  • Fast and high precision assembly: the assembly cycle time does not exceed 2 seconds.
  • It increases productivity: there are no interruptions and up to 60 rivets per minute can be placed.
  • Diversity. It is available in a wide range of materials: aluminium, steel and stainless steel.
  • Wide range of lengths and diameters.
  • No deforma las superficies una vez remachadas (pintadas, esmaltadas, etc.).
  • It does not deform surfaces after the riveting process is finished (painted, glazed surfaces etc.).
  • Different materials, with different types of manufacturing can be fastened: composites, laminates, heat treated materials, etc.
  • Conical end to facilitate the hole entry.
  • It expands radially during installation to ensure the best hole fill.
  • Having no mandrel means avoiding noises or short circuits resulting from residual portions of mandrels inside the body.
  • They do not come loose from dynamic stress (vibrations in general).
  • They can be fixed in applications with a single-side access and can be assembled from both ends.
  • Their bulging or pre-shaped end provide a high torque value in the joint and a good resistance to shear strength.
Materials to be fixed
  • Metal to Metal
    • Aluminium
    • Steel
    • Stainless Steel
  • Plastic to Metal
  • Automotive industry
  • Electronics
  • Electrical engineering
  • Furniture
  • Electrical appliances
  • Ladder manufacturing
  • Light metal construction
Technical characteristics

Materials: Aluminiium, Steel and Stainless Steel.

Diameters: 3.2 mm., 4.0 mm. y 4.8 mm.

Heads: Dome and Countersunk heads.

SteelGalvanic zincating
Stainless steel 
Name Body Mandrel Dome Large Countersunk


Stainless st