BSV Speed Rivet

Speed rivet with a repetition system suitable for applications with soft or fragile materials. Bralo BSV Rivet is synonymous with control and efficiency.

Bralo BSV Speed Rivets are designed for the joint of soft or low resistance materials that require a controlled tightening.

They are supplied in a strip of paper (loading system) and placed using a repetition system with a single mandrel. At the end of a riveting cycle, the next rivet is automatically fed in the tool nose-piece, ready to begin a new cycle. The result is a fast, simple and low cost assembly.

Features and benefits
  • Single-side high speed assembly.
  • High precision and high quality assembly.
  • It increases productivity: there are no interruptions and up to 60 rivets per minute can be placed.
  • Diversity. It is available in a wide range of materials: aluminium, steel and stainless steel.
  • It does not deform surfaces after the riveting process is finished (painted, glazed…etc.).
  • Different materials, with different types of manufacturing can be fastened: composites, laminates, heat treated materials, etc.
  • Conical end to facilitate the hole entry.
  • It expands radially during installation to ensure the best hole fill.
  • Having no mandrel means avoiding noises or short circuits resulting from residual portions of mandrels inside the body.
  • They do not come loose from dynamic stress (vibrations in general).
  • Their bulging or pre-shaped end provide a high torque value in the joint and a good resistance to shear strength.
Materials to be fixed
  • Metal to Plastic
  • Metal to Wood
  • Metal to Fiberglass
  • Metal to Plastic
  • Metal to soft materials and low resistance materials in general
  • Plastic to Plastic
  • Plastic to soft materials and low resistance materials in general
  • Plastic industry
  • Wood industry
  • Automotive industry
  • Electronics and electrical engineering
  • Electrical appliances
  • Injection moulded components
  • Plastic in general
  • Light manufacturing in general
Technical characteristics

Materials: Aluminium, Steel and Stainless Steel.

Diameters: 3.2 mm., 4.0 mm. y 4.8 mm.

Heads: Dome and Countersunk.

SteelGalvanic zincating
Stainless steel 
Name Body Mandrel Dome Large Countersunk