BSV SPEED RIVETS

BSV Quick Rivets are designed for quick fasteners in soft or low strength materials that require controlled tightening.

They are supplied preloaded in paper strip and are placed using a single shank repeat system.

SELECT MATERIAL AND HEAD TYPE

Body

Head

Clear

Ø

3.2 to 4.8 mm

Fast assembly cycle. Time does not exceed 2 seconds and up to 60 rivets can be set per minute.
Does not deform surfaces once riveted (painted, enameled, etc.).
Tapered end to facilitate the insertion into the bore.
Radial expansion during installation ensures proper filling of the adequate filling of the bore avoiding dynamic stresses.

Sector de la automoción,

Electrónica e ingeniería eléctrica,

Electrodomésticos,

Fabricación ligera en general,

Industria de Plásticos,

Plásticos en general,

Industria de la madera,

Componentes moldeados por inyección

Head material	Type	Corrosion conditions	Temperature resistance	Appearance
Alu/Steel/Stainless	Lacquering (epoxy or acrylic paint)	Slight	Moderate	According to color
Steel	Passivation zinc plating	Slight	Moderate	Blue Black finish Yellow
Steel	Passivation zinc plating with sealing	Moderate	Good	According to passivation
Steel	Zinc-iron coating	Moderate	Moderate	Gray-matte Black finish
Steel	Zinc-nickel plating	Severe	Good	Grey
Steel	Special zinc-nickel coating	Very severe	Good	Grey
Aluminum or Steel	Delta seal	Moderate	Moderate	Silver-gray Matte black
Aluminum	Aluminum anodizing	Severe	Moderate	Silver Black
Inox	Stainless steel passivation	Very severe	Good	No change