Drive rivet
The Bralo Drive rivet is a highly effective method of joining sheets and profiles to soft, fibrous surfaces such as walls or roofs. Widely used in the construction sector to fix plates, moldings, angles, insulation or coatings. The mandrel opens in 3 blades inside the material and is securely fixed.
Body |
Aluminum |
Mandrel |
Inox A2 |
Head |
Large |
Ø
4.8 mm
Materials can be riveted with through and blind holes.
Large support surface thanks to its large head that acts as a support and makes it suitable for soft materials.
Corrosion resistant (the rivet mandrel is made of stainless steel).
It does not require the use of a specialized tool, a hammer blow is enough to obtain a quick and fast and secure fastening.
Construcción,
Tapicería,
Señalización
| Head material | Type | Corrosion conditions | Temperature resistance | Appearance |
|---|---|---|---|---|
| Alu/Steel/Stainless | Lacquering (epoxy or acrylic paint) | Slight | Moderate |
|
| Steel | Passivation zinc plating | Slight | Moderate |
|
| Steel | Passivation zinc plating with sealing | Moderate | Good |
|
| Steel | Zinc-iron coating | Moderate | Moderate |
|
| Steel | Zinc-nickel plating | Severe | Good |
|
| Steel | Special zinc-nickel coating | Very severe | Good |
|
| Aluminum or Steel | Delta seal | Moderate | Moderate |
|
| Aluminum | Aluminum anodizing | Severe | Moderate |
|
| Inox | Stainless steel passivation | Very severe | Good |
|
| Type | Material | Head style | |||
|---|---|---|---|---|---|
| Designation | Body | Mandrel | Dome | Large | Countersunk |
| DRIVE RIVET | Aluminum | Inox |  |
||
